Flow Meter Application:

The GM Series Meter monitors flowrate of fuel usage in two diesel powered boilers. The steam produced is used in the facility. The meter records totals and flowrate on the local display then transmits a 4-20 mA signal to the PLC allowing for greater monitoring and control throughout the facility.

Flow Meter Problem:

The customer needed to monitor the consumption rate of the generator from a remote location. Control of different systems within this facility is critical.

Company Type: Manufacturing

Market: Industrial Agricultural Chemicals

Application Category: Monitoring

GPI Flow Meters Used: GM003S2R41-6

Flow Meter Drawing:

Flow Meters for Measuring Diesel Fuel In Boilers

Flow Meter Solution:

A pulse output to a PLC allowed for communication from the location to a remote site. The upgrade in technology for this company provided better accuracy and control.

Advantages of Using GPI Flow Meters:

  • Cost Savings
  • Accuracy
  • Safety
  • Upgrade in Technology

Questions?

If you have questions please feel free to leave a comment on this page or call GPI Customer Service at 888-996-3837 or 316-686-6746.  You can also visit the GPI web site at www.gpimeters.net.

Company Type: Metro Airport

Market: Transportation Equipment

Application Category: Inventory Management

GPI Flow Meters Used: G2S20N09GMB with 113275-1

Problem:

The expensive deicing mixture was being wasted causing expenses to increase. Monitoring usage by individual treatment was required. Accurate billing receipts were important.

Read the rest of this entry »

Company Type: Chemical Sales & Delivery

Market: Industrial/Agricultural Chemicals

Application Category: Inventory Management

GPI Flow Meters Used: GM007C2R22-5


Problem:

The range of chemicals delivered required a meter compatible with a wide range of chemicals. Other meters would fail or require more maintenance and repair. Accuracy was critical in billing end-users.

Read the rest of this entry »

Company Type: Drinking Water Utility

Market: Water Supply

Application Category: Monitoring

GPI Flow Meters Used: G2P05N09GMA

Problem:

Opening the pipe to measure sample flow rate could expose technicians to toxic levels of ozone. Leaving valves wide open wastes large volumes of water. If the flowrate is to low or too high analyzer readings are not accurate.

Read the rest of this entry »

Company Type: Medical Device Manufacturing

Market: Pharmaceuticals

Application Category: Batching

GPI Flow Meters Used: GNT-051 with GX500

 

Problem:

The manufacturing process required accurate measurement of two materials into a single batch. Two lines supply materials that are batched into a blend tank.

Read the rest of this entry »

Company Type: Meat Packer

Market: Food

Application Category: Batching/Dispensing

GPI Flow Meters Used: G2S07N09GMA

 

Problem:

Portable cleaning solution carts need to be loaded with caustic and acidic cleaning agents. These agents vary in density and pH. Both batch and
continuous total are required when loading the carts with solutions.

Read the rest of this entry »

Company Type: Municipality

Market: Water Supply/Irrigation

Application Category: Monitoring

GPI Flow Meters Used: G2S10N09GMA

 

Problem:

Homeowners and businesses need to verify flowrate of water supply and accuracy of city equipment from main water line to individual properties. Other methods of verification can be inconvenient,time consuming and costly.

Read the rest of this entry »

Company Type: Filling Machine Manufacturer

Market: Food, Beverage, Tobacco

Application Category: Batching

GPI Flow Meters Used: GSCPS-150; GSCPS-100

 

Problem:

Accurately measure fluid into containers at a reasonable cost while maintaining 3A sanitary requirements with a meter that can withstand repeated stop/start batching flows.

Read the rest of this entry »

Company Type: Cooling Tower Manufacturer

Market: Fabrication Metal Products

Application Category: Monitoring

GPI Flow Meters Used: A109GMN100NA1 113265-1 Remote Kit

 

Problem:

Companies need to adjust flowrate to maintain a constant temperature of cooling water used for various processes. Unstable or fluctuating chill water temperatures can cause quality problems or possibly even damage to expensive equipment.

Read the rest of this entry »

Company Type: Concrete Contractor/Equipment

Market: Stone/Clay/Cement

Application Category: Monitoring

GPI Flow Meters Used: 01N31GM and A109GMN100NA1

 

Problem:

Drivers need to add water on site to bring the mix to suitable slump rating. The amount of add water is very subjective and is not monitored. This results in variances in batches and quality of product.

Read the rest of this entry »

About this site

The Flow Meter Applications web site was created to inform individuals interested in learning more about how GPI flow meters are used across different industries. We hope you will continue to visit our web site regularly to read about the multiple ways GPI flow meters are helping individuals around the world.

Add to Technorati Favorites

Add to Technorati Favorites

Photostream

  • admin: @Jared We do not have correction factors, but most of out meters can be field calibrated to liquids [...]
  • Jared Stearns: Mestek uses GPI turbine flowmeters in development and testing of hydronic heating and cooling system [...]
  • admin: The GSPCS-100 and GSPCS-150 can be ordered in many ways. If you are looking for the turbine with jus [...]
  • ion: The indicated part number is GSPCS-150 or 100. The drawing is showing a signal output to the PLC. Is [...]
  • bjorn Nitmo: this is awesome! [...]